Moin Moin, liebe Zeichengemeinde
Ich versuche gerade die Relingshalterung bei meinem Boot zu vollenden. Die Relingshalterung ist nicht das Problem aber die Fußplatte ist die Herausforderung. Gibt es in Rhino einen Funktion die dabei hilft Objekte auf einer Oberfläche zu platzieren?, Hier mal ein Foto von der Baustelle:
LG
Christian
Hallo Christian,
dazu fallen mir folgende Transformier-Befehle ein:
A) Ausrichten3Punkte: https://docs.mcneel.com/rhino/7/help/de-de/index.htm#commands/orient3pt.htm
B) AufFlächeAusrichten: https://docs.mcneel.com/rhino/7/help/de-de/index.htm#commands/orientonsrf.htm
C) Splop (mit Option Starr=Ja): https://docs.mcneel.com/rhino/7/help/de-de/index.htm#commands/splop.htm
D) AnKonstruktionsebeneAusrichten: https://docs.mcneel.com/rhino/7/help/de-de/index.htm#commands/remapcplane.htm
E) 3DRotation: https://docs.mcneel.com/rhino/7/help/de-de/index.htm#commands/rotate3d.htm
Viel Glück
Michael